The relationship between hemoglobin and serum uric acid / 预防医学

Objective@#To analyze the relationship between hemoglobin ( Hb ) and serum uric acid ( SUA ), so as to provide basis for preventing hyperuricemia ( HUA ) . @*Methods@#As the research subjects, people who underwent physical examination in Zhejiang Provincial People's Hospital from January 1, 2017 to October 31, 2020 for 4 years in a row and who were non-HUA in 2017 were selected. The physical examination data were collected, including body mass index, blood pressure, blood routine, blood biochemical tests, etc. The subjects grouped by quartiles of Hb level in 2017. The occurrence of SUA elevation ( SUA increased ≥60 μmol/L from baseline ) , significantly SUA elevation ( SUA increased ≥120 μmol/L from baseline ), HUA ( SUA>420 μmol/L ) and severe HUA ( SUA ≥480 μmol/L ) in the next 3 years were taken as end events. The incidence, occurrence time and risk of end events in different Hb groups were analyzed.@*Results@#A total of 4 073 subjects were selected and divided into 4 groups according to the Hb level from low to high, with 969 subjects in group A, 907 subjects in group B, 1 109 subjects in group C and 1 088 subjects in group D. SUA elevation was in 745 patients ( 18.29% ); significantly SUA elevation was in 105 patients ( 2.58% ); HUA was in 514 patients ( 12.62% ); severe HUA was in 94 patients ( 2.31% ). The incidence of SUA elevation and significantly SUA elevation showed a decreasing trend with the increase of Hb level ( P<0.05 ). The occurrence time of SUA elevation in group A to D was 2.788, 2.817, 2.860 and 2.814 years, and the difference was statistically significant ( P<0.05 ). There were no statistically significant differences in the occurrence time of other end events ( P>0.05 ). The multivariate Cox proportional hazards regression analysis showed that compared with group A, other Hb groups had lower risk ( HR=0.498-0.776, 95%CI:0.253-0.981 ) of SUA elevation, significantly SUA elevation and severe HUA after adjusting for gender, age, ALT, Scr, body mass index, etc.@*Conclusions@#With the increase of Hb level, the incidence of SUA elevation may decrease and the occurrence time is prolonged. Compared with the lowest Hb group, the higher Hb groups had lower risk of SUA elevation, significantly SUA elevation and severe HUA.

Effects of moxifloxacin,tinidazole and psychological intervention on pelvic in terrention / 中国生化药物杂志

Objective To investigate the clinical effect of moxifloxacin combined with tinidazole and psychological intervention in the treatment of pelvic inflammatory disease. Methods The control group treated with moxifloxacin combined with tinidazole,pelvic inflammatory disease,the study group patients were given pelvic inflammatory tinidazole, moxifloxacin, combined with psychological intervention treatment (tinidazole and moxifloxacin administration methods and drug sources are the same as the control group). The clinical efficacy of two groups of pelvic inflammatory disease patients treated with 12 days was recorded. Results The group of patients with pelvic inflammatory disease were successfully completed corresponding treatment, the total effective rate of the study group was 95.65%, the control group was 68.18%, study group patients with pelvic inflammatory disease clinical curative effect was significantly better than the control group (P<0.05). Conclusion The application of moxifloxacin,tinidazole and psychological intervention in the treatment of pelvic inflammatory disease can significantly improve the clinical efficacy of patients, and is conducive to the protection of their quality of life, physical and mental health.

Effects of moxifloxacin,tinidazole and psychological intervention on pelvic in terrention / 中国生化药物杂志

Objective To investigate the clinical effect of moxifloxacin combined with tinidazole and psychological intervention in the treatment of pelvic inflammatory disease. Methods The control group treated with moxifloxacin combined with tinidazole,pelvic inflammatory disease,the study group patients were given pelvic inflammatory tinidazole, moxifloxacin, combined with psychological intervention treatment (tinidazole and moxifloxacin administration methods and drug sources are the same as the control group). The clinical efficacy of two groups of pelvic inflammatory disease patients treated with 12 days was recorded. Results The group of patients with pelvic inflammatory disease were successfully completed corresponding treatment, the total effective rate of the study group was 95.65%, the control group was 68.18%, study group patients with pelvic inflammatory disease clinical curative effect was significantly better than the control group (P<0.05). Conclusion The application of moxifloxacin,tinidazole and psychological intervention in the treatment of pelvic inflammatory disease can significantly improve the clinical efficacy of patients, and is conducive to the protection of their quality of life, physical and mental health.

Effects of electroacupuncture with manifestation-root acupoint combination on ultrastructure and biosynthesis in mitochondrial of quadriceps femoris in rats with insulin resistance / 中国针灸

<p><b>OBJECTIVE</b>To explore the mechanism of electroacupuncture on improving insulin resistance of rat from aspects of morphology and function of mitochondrial in quadriceps femoris.</p><p><b>METHODS</b>Forty-eight 8-week Wistar rats (female and male in half) were randomly divided into a normal group (16 rats, group A), a model control group (16 rats, group B), a model plus electroacupuncture (EA) group (8 rats, group C) and a model plus sham acupoint EA group (8 rats, group D). Group A was given with basic diet while high-fat diet was applied in the group B, group C and group D for 8 weeks to establish model of insulin resistance. After the model establishment, "Guanyuan" (CV 4), "Zhongwan" (CV 12), "Zusanli" (ST 36) and "Fenglong" (ST 30) were selected according to acupoint combination of manifestation-root in the group C, while four points in non-meridian area where 1 to 2 mm next to the acupoints used in group C were selected in the group D. The treatment was given 15 min per time with 1 mA of intensity and 2 Hz in frequency, 5 times per week for totally 8 weeks. The transmission electron microscope was adopted to observe mitochondria structure, and chemical colorimetry was used to test the activity of adenosine triphosphate (ATP) synthase and phosphomolybdic acid colorimetry was applied to measure the content of ATP.</p><p><b>RESULTS</b>After the treatment, the body mass was (401.63 +/- 109.81) g in the group B, which was significantly higher than (305.88 +/- 62.72) g in the group A (P < 0.05); morphological structure of mitochondrion was damaged, showing swelling and deformation; the activity of ATP synthase was decreased (P < 0.05) and the content of ATP in tissue of quadriceps femoris was also obviously lowered (P < 0.05). The body mass was (294.13 +/- 53.78) g in the group C, which was significantly lower than that in the group B (P < 0.05); the damaged mitochondrion was restored and merged among each other; the activity of ATP synthase was increased (P < 0.05); the content of ATP in tissue of quadriceps femoris was obviously lifted (P < 0.05). The results in group D were not different from those in group B.</p><p><b>CONCLUSION</b>The electroacupuncture with manifestation-root acupoint combination could improve the recovery of damaged structure of mitochondrion and promote the merge among each other, which could enhance oxidizing capacity, lower body mass and improve synthetic rate of ATP.</p>

Effects of Acupuncture Therapy on Triglyceride of Quadriceps Femoris in High Fat Diet Feeding-induced Insulin Resistance Rats / 中国中医药信息杂志

Objective To observe the effects of acupuncture therapy on triglyceride (TG) content of quadriceps femoris in the high fat diet feeding-induced insulin resistance rats; To discuss acupuncture mechanisms to improve the insulin sensitivity. Methods Thirty-two Wistar rats at the age of eight weeks were randomly divided into normal group, model group, electro-acupuncture group, and sham electro-acupuncture group. The normal group was given basic diet, and model group, electro-acupuncture group and sham electro-acupuncture group were given high fat diet for 8 weeks, after which, the model of insulin resistance was successfully obtained. Electro-acupuncture group was given acupuncture therapy with “Guanyuan (GV4)”, “Zhognwan (GV12)”, “Zusanli (ST36)”, and “Fenglong (ST40)” for 8 weeks. Sham electro-acupuncture group was given stimulation at non-acupuncture points which were not on the meridians and near the acupoints but not at the area of the acupoints. In addition, food intake and body weight of each group were recorded, blood glucose was tested, TG content of quadriceps femoris was measured by enzymatic method after the treatment. Results The weight of the rats and TG levels of quadriceps femoris in electro-acupuncture group and sham electro-acupuncture group were significantly lower than those in model group, with significant statistical difference (P<0.05), especially in electro-acupuncture group. Conclusion Acupuncture therapy could improve insulin sensitivity to prevent and its related diseases.

Preliminary study of wireless biofeedback therapy for treatment of bruxism / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To access the effect of wireless biofeedback therapy on bruxism.</p><p><b>METHODS</b>Ten voluntary bruxers (seven female and three male, mean age 26.1 years) were invited to participate in this clinical research. An electric resistance strain gauge was embedded in the position of canine of a maxillary splint for monitoring the abnormal clenching or grinding movement of teeth during sleep. The relevant details of bruxism events, including value of relative force, occurring time and duration were recorded and analyzed by the receiver device and monitoring program respectively. Meanwhile, for the purpose of nerve system and muscle relaxation, a watch-style device around the patient's wrist will vibrate to alert the patient of teeth grinding or clenching if the value of biting force and duration exceed the threshold. Total average episodes of bruxism and duration was observed during eight hours sleep, and was analyzed with one-way analysis of variance in SPSS 19.0 by the end of 6th week and three months following biofeedback therapy.</p><p><b>RESULTS</b>The average episodes of bruxism has declined dramatically from (9.8 ± 2.2) times to (3.0 ± 1.2) times during one night (P < 0.05), and the average duration of bruxism events was reduced from (20.7 ± 12.2) s to (10.0 ± 3.4) s (P < 0.05) after six weeks biofeedback therapy. By the end of three months, the average episodes declined to (2.9 ± 1.2) times (P < 0.05), and the average duration decline to (9.2 ± 2.9) s (P < 0.05) with contrast to preliminary night.</p><p><b>CONCLUSIONS</b>The pressure-based wireless biofeedback device is able to monitoring clenching and grinding of bruxism. The results suggest that biofeedback therapy may be an effective, novel and convenient measure for treatment of bruxism according to several months therapy.</p>

Improving bonding of zirconia through deposition of silica layer via collosol-gelatin process, the roles of NaHCO3 / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To evaluate the effects of NaHCO3 on gelation of silica sols and shear bond strength of silica coated zirconia via collosol-gelatin (Sol-Gel) process.</p><p><b>METHODS</b>The gelation time of silica sols after being mixed with 1%, 3%, 5%, 7%, 10% concentrations of NaHCO3 was recorded. The one got the shortest gelation time was used for the following tests. Zirconia blocks were prepared and divided into five experimental groups according to surface conditioning methods: group A, alumina sandblasting; group B, sandblasting + tribochemical silica coating + silane; group C, sandblasting + silica coating via Sol-Gel process + silane; group D, sandblasting + silica coating via Sol-Gel process (NaHCO3 was used) + silane; group E, sandblasting + zirconia primer. A composite resin column was bonded on the treated zirconia surface with Bis-GMA based composite resin cement. All specimens were subjected to shear bond strength (SBS) tests.</p><p><b>RESULTS</b>The shortest gelation time of silica sols were found when silica sols was mixed with 10% NaHCO3. Group A showed the lowest SBS values of (4.12 ± 0.52) MPa, which was significant different from SBS of group B [(10.24 ± 2.78) MPa], C [(7.36 ± 1.59) MPa], D [(9.79 ± 2.07) MPa], D [(8.39 ± 0.49) MPa], and no statistical difference was found between group C and D.</p><p><b>CONCLUSIONS</b>The silica coating via Sol-Gel process can significantly improve the bond strength of zirconia, and NaHCO3 would not exert influences to bonding.</p>

Induction of apoptosis and related genes by five kinds of dental materials on L929 cell / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To evaluate a new type of diatomite-based machinable ceramic biocompatibility by studying its induced apoptosis on L929 cell in contrasted with other prosthodontics materials.</p><p><b>METHODS</b>Cell line was treated with extracting liquid containing different concentrations of diatomite-based machinable ceramic and other materials. Flow cytometry tested cell cycle progression and induced cell apoptosis. Annexin V-FITC/PI apoptosis staining kit quantitative detected cell death patterns. The expression of Bcl-2 and Bax mRNA were determined by reverse transcription-polymerase chain reaction.</p><p><b>RESULTS</b>The experimental groups had no special influence on cell cycle. Apoptosis rates of the new ceramic closed to the negative group (P > 0.05). The apoptosis rate of resin was the highest, and the cell necrosis level of resin was increased, which had significant difference to the new ceramic (P < 0.05). The Bcl-2 and Bax mRNA levels of the new ceramic and the negative group were closed to each other, which had no statistical significance (P > 0.05).</p><p><b>CONCLUSION</b>The new diatomite-based machinable ceramic has no apparent cytotoxicity, which is consistent with the clinical application of the basic requirements of biocompatibility.</p>

Effect of niobium nitride on the bonding strength of titanium porcelain by magnetron sputtering / 中华口腔医学杂志

<p><b>OBJECTIVES</b>To investigate the effect of magnetron sputtered niobium nitride (NbN) on the bonding strength of commercially pure cast titanium (Ti) and low-fusing porcelain (Ti/Vita titankeramik system).</p><p><b>METHODS</b>Sixty Ti specimens were randomly divided into four groups, group T1, T2, T3 and T4. All specimens of group T1 and T2 were first treated with 120 microm blasted Al2O3 particles, and then only specimens of group T2 were treated with magnetron sputtered NbN film. All specimens of group T3 and T4 were first treated with magnetron sputtered NbN film and then only specimens of group T4 were treated with 120 microm blasted Al2O3 particles. The composition of the deposits were analyzed by X-ray diffraction (XRD). A universal testing machine was used to perform the three-point bending test to evaluate the bonding strength of Ti and porcelain. The microstructure of NbN, the interface of Ti-porcelain and the fractured Ti surface were observed with scanning electron microscopy (SEM) and energy depressive spectrum (EDS), and the results were compared.</p><p><b>RESULTS</b>The XRD results showed that the NbN deposits were cubic crystalline phases. The bonding strength of Ti and porcelain in T1 to T4 group were (27.2+/-0.8), (43.1+/-0.6), (31.4+/-1.0) and (44.9+/-0.6) MPa. These results were analyzed by one-way analysis of variance and differences between groups were compared using least significant difference test. Significant inter-group differences were found among all groups (P<0.05). The results of SEM showed that with treatment of Al2O3 or NbN, alone, pre-cracks were found in the interface of Ti-porcelain, while samples treated with both Al2O3 and NbN had better bond. EDS of Ti-porcelain interface showed oxidation occurred in T1, T2 and T3, but was well controlled in T4.</p><p><b>CONCLUSIONS</b>Magnetron sputtered NbN can prevent Ti from being oxidized, and can improve the bonding strength of Ti/Vita titankeramik system. Al2O3 blast can also improve the bonding strength of Ti/Vita titankeramik system.</p>

Color property evaluation of 7 kinds of resin-based composite products / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the color stability and opacity of seven resin-based composite products after ultraviolet irradiation.</p><p><b>METHODS</b>Seven kinds of light-cured resin-based composite products (Aelite Flo, Filtek Z350 Flowable, Clearfil AP-X, Dyract AP, Z100, Durafill VS, Filtek Z350 Universal) were tested in the study (five for each group). Changes in color and opacity of test samples were determined before and after 8, 16 and 24 h ultraviolet irradiation using the CIE 1976 L*a*b* system and CIE 1931 XYZ system by a colorimeter.</p><p><b>RESULTS</b>The color of resin disks suffering ultraviolet irradiation was different in different irradiating time. Color difference values ranged from 1.85-3.21 for 8 h ultraviolet irradiation to 2.88-4.55 for 24 h ultraviolet irradiation. Opacity values ranged from 0.75-0.82 before ultraviolet irradiation to 0.80-0.98 after 24 h ultraviolet irradiation. Among all the groups, Z100 and Filtek Z350 Flowable showed the biggest color change, while Filtek Z350 Universal showed the highest opacity.</p><p><b>CONCLUSION</b>It can be concluded that for some products, ultraviolet irradiation leads to color instability and opacity variation.</p>

Effects of ultraviolet aging on color and translucency of composite resin cements / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the color stability and translucency of four composite resin cements after ultraviolet (UV) aging.</p><p><b>METHODS</b>20 composite resin cement disks for four groups (Group A, dual cured, Biscem; Group B, light cured, Choice; Group C, self cured, PermaCem; Group D, self cured, RelyX Aplicap) were prepared according to their manufacture recommendation. Changes in color and translucency of test samples were determined before and after UV aging for 8, 16 and 24 hour using the CIE L* a* b* system by a colorimeter. The results were analyzed by LSD multi-compare tests.</p><p><b>RESULTS</b>The color changes of composite resin cement disks suffering UV aging were significantly different when irradiated different time. For the same irradiated time, Group C had the highest delta E, and Group B and D had the smaller ones. Translucency was found no difference among different irradiated time for group A, B and D. Translucency of group C decreased after UV aging.</p><p><b>CONCLUSION</b>Translucency of composite resin cement kept stable after UV aging, and color coordinate changed after UV aging.</p>

Effect of silicon coating on bonding strength of ceramics and titanium / 华西口腔医学杂志

<p><b>OBJECTIVE</b>This study investigated the effect of silicon coating (SiO2) by solution-gelatin (Sol-Gel) technology on bonding strength of titanium and ceramics.</p><p><b>METHODS</b>Sixteen pure titanium specimens with the size of 25 mm x 3 mm x 0.5 mm were divided into two groups (n=8), test group was silicon coated by Sol-Gel technology, the other one was control group. The middle area of the samples were veneered with Vita Titankeramik system, the phase composition of two specimens were characterized by X-ray diffraction (XRD). The bonding strength of titanium/porcelain was evaluated using three-point bending test. The interface of titanium and porcelain and fractured titanium surface were investigated by scanning electron microscope (SEM) with energy depressive spectrum (EDS).</p><p><b>RESULTS</b>Contents of surface silicon increased after modification with silicon coated by Sol-Gel technology. The mean bonding strength of test group and control group were (37.768 +/- 0.777) MPa and (29.483 +/- 1.007) MPa. There was a statistically significant difference (P=0.000) between them. The bonded ceramic boundary of test group was wider than control group.</p><p><b>CONCLUSION</b>Silicon coating by Sol-Gel technology was significant in improving bonding strength of titanium/Vita Titankeramik system.</p>

Effects of magnetron sputtered ZrN on the bonding strength of titanium porcelain / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the effect of magnetron sputtered ZrN on the bonding strength between a low-fusing porcelain (Ti/Vita titankeramik system) and commercially pure cast titanium.</p><p><b>METHODS</b>Sixteen specimens were randomly assigned to test group and control group (n=8). The control group received no surface treated. Magnetron sputtered ZrN film was deposited on the surface of specimens in the test group. Then the sixteen titanium-porcelain specimens were prepared in a rectangular shape and went through three-point bending test on a universal test machine. The bond strength of Ti/porcelain was recorded. The phase composition of the specimens was analyzed using X-ray diffraction (XRD). The interface at titanium and porcelain and the titanium surface after debonding were observed with a scanning electron microscopy (SEM) and analyzed using energy depressive spectrum (EDS).</p><p><b>RESULTS</b>New phase of ZrN was found with XRD in the test group. Statistical analysis showed higher bond strength following ZrN surface treatment in the test group [(45.991+/-0.648) MPa] than that in the control group [(29.483+/-1.007) MPa] (P=0.000). Bonded ceramic could be observed in test group, the amount of bonded ceramic was more than that in the control group. No obvious bonded ceramic in control group was found.</p><p><b>CONCLUSIONS</b>Magnetron sputtered ZrN can improve bond strength of Ti/Vita titankeramik system significantly.</p>

Effect of nano-silica coating prepared by different concentration silica sol on shear bond strength of alumina ceramic / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To evaluate the effect of nano-silica coating prepared by different concentration silica sol on shear bond strength between alumina ceramic and resin cement.</p><p><b>METHODS</b>Silica coating was prepared with colloidal silica sol on alumina ceramic surface that was treated with air particle abrasion. Infrared spectrum (IR), scanning electron microscopy (SEM) and energy dispersive spectrometer (EDS) were used to analyze the silica coating. A total of 32 alumina ceramic discs were randomly divided into 4 groups with 8 discs per group, which received different surface treatments as silane couple agent (control group), 20% silica sol + silane (group A), 30% silica sol + silane (group B), 40% silica sol + silane (group C). Each ceramic disc was bonded to composite with resin cement, and then shear bond strength of these samples was tested.</p><p><b>RESULTS</b>It was observed from the IR pictures that symmetrically flexible vibration absorption kurtosis, anti-symmetrically flexible vibration absorption kurtosis, and bending vibration absorption kurtosis of Si-O-Si enhanced after heat treatment. SEM pictures showed that nanoparticles in coating gel were well distributed and some of them conglomerated after heat treatment. There was a little conglomeration in 20% coating, more in 30%, and the most in 40%. Contents of surface silicon increased after modification with silica coating prepared by sol-gel method. Bond strength of three groups with silica coating was significantly higher than that of the group with only silane couple agent [(1.881 +/- 0.156) MPa] (P < 0.05). Group B gained the highest strength [(4.852 +/- 0.178) MPa] compared with group A [(3.196 +/- 0.171) MPa] and group C [(3.576 +/- 0.671) MPa] (P < 0.05).</p><p><b>CONCLUSIONS</b>Surface silicon contents all increased after surface modification with different concentration silica sol. Silica coating followed with silane couple agent could significantly enforce bond strength of alumina ceramic, with 30% silica sol group gaining the highest bond strength.</p>

Surface modification of dental alumina ceramic with silica coating / 华西口腔医学杂志

<p><b>OBJECTIVE</b>To make silica coating through sol-gel process, and to evaluate the wettability of dental alumina ceramic with or without coating.</p><p><b>METHODS</b>Silica coating was prepared with colloidal silica sol on In-Ceram alumina ceramic surface which had been treated with air particle abrasion. Coating gel after heat treatment was observed with atomic force microscope (AFM), and was analyzed by infrared spectrum (IR) with gel without sintered as control. Contact angles of oleic acid to be finished, sandblasted and coated ceramic surface of were measured.</p><p><b>RESULTS</b>AFM pictures showed that some parts of nano-particles in coating gel conglomerated after heat treatment. It can be seen from the IR picture that bending vibration absorption kurtosis of Si-OH also vanished after heat treatment. Among contact angles of three treated surface, the ones on polished surface were the biggest (P = 0.000, P = 0.000), and sandblasting+silica coating surface the smallest (P = 0.000, P = 0.003).</p><p><b>CONCLUSION</b>Silica coating can be made with sol-gel process successfully. Heat treatment may reinforce Si-O-Si net structure of coating gel. Wettability of dental alumina ceramic with silica coating is higher than with sandblasting and polishing.</p>